{dede:field.body/} Although the shrinking machine has great convenience, it may have some faults due to the limitations of the machine. If there is damage, it is necessary for manufacturers to know the necessary troubleshooting methods. So what is the specific troubleshooting about the shrinking machine? How to operate?

Usually, there are two kinds of faults about this kind of machine. The first is that when the power is turned on, there is no heating process. So for this phenomenon, it has the following several possible faults. One is about the heating switch. It may be damaged. You just need to adjust the switch to make the machine work again. The second kind of failure possibility is that the indoor circuit line is aging, and you need to exchange the relevant connecting wires. Then there are two possible faults: the electric heating pipe head is not connected or the electric heating pipe is damaged, and the temperature control board is damaged. Once there is no heating process, you only need to eliminate the faults one by one according to these faults and find out the cause of the fault.

Another kind of shrinking machine failure is that its conveying network does not work. The possible reasons for this failure are as follows. First of all, one possibility is that the transmission switch is aging and damaged. The second possibility is the aging of the adjustment control board, and the positioner may be broken. You only need to check and replace them. Another possibility is that the conveying mechanism is stuck. You need to check and remove the fault. According to these possible causes, you can find the root cause of the fault and make the machine run again.